BrewBuilt - X3 Jacketed Conical - PLACEHOLDER

BrewBuilt® X3 Jacketed Uni Conical Fermenter

38 gal
$1,999.99
Skip to product information
BrewBuilt - X3 Jacketed Conical - PLACEHOLDER

BrewBuilt® X3 Jacketed Uni Conical Fermenter

$1,999.99
Shipping calculated at checkout.
Measurement
In this setup
  • X3 jacketed conical with welded cooling jacket
  • Pressure Pack lid with Clear Float dip tube
  • Flex Chamber jar, 3" dump valve and neoprene jacket

Needs a glycol chiller and tubing for cooling. Packages include both.

Size guide  ·  Compare X3 setups

Free Shipping on orders over $79

This item ships freight only.

WARNING : This product can expose you to chemicals including Chloroprene, which is/are known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov.

This item is not eligible for sitewide price reductions or percentage discounts.
7 to 38 galFour sizes for 5 gal to 1 bbl batches
3"Bottom dump with butterfly valve
8"Tri-clamp lid you can clean through

Fully loaded, so you don't upgrade later

Every X3 comes with the cooling jacket, the Pressure Pack lid and the Flex Chamber as standard.

External cooling jacket

External cooling jacket

Glycol runs through a jacket welded to the outside of the tank, so there is no coil inside your beer to clean around, and it has the cooling power to cold crash.

Read more

Internal cooling coils are cheaper to make, but they are harder to clean and struggle to cold crash in a warm room. The X3's jacket has 1.5" tri-clamp inlet and outlet ports and a neoprene sleeve to insulate it. Pair it with an IceMaster glycol chiller and the insulated tubing kit.

The whole tank is 304 stainless with a mirror polish inside and out, and the interior welds are ground and polished smooth for sanitation.

Pressure Pack with Clear Float

Pressure Pack with Clear Float

Ferment, carbonate and serve from one vessel. The floating dip tube draws from the top down, so every sample and transfer pulls the clearest beer.

Read more

Pressure transfers to keg protect your beer from oxygen when it is most vulnerable, and sampling under pressure avoids the small dose of oxygen a sample valve lets in. The lid also has draft-style QD connections for sampling and serving, and a spare 1.5" port for a Hop Bong. To ferment under pressure, add the Kit for Fermenting Under Pressure.

3" dump valve and Flex Chamber

3" dump valve and Flex Chamber

An oversized 3" butterfly valve drops dry hops and yeast without clogging, straight into the clear Flex Chamber jar. Watch fermentation, remove trub and harvest yeast without opening the tank.

Read more

The mirror-polished cone lets flocculated yeast slide down and collect neatly at the bottom. The Flex Chamber was developed with KegLand from clear Tritan and holds pressure. Ball lock adapters thread into its side ports for oxygenation or carbonation stones, a CO2 purge or adding hops. Cap it with a 3" end cap to store harvested yeast in the fridge.

Built like a commercial tank

Built like a commercial tank

An 8" tri-clamp lid you can reach through to clean, three horizontal cone ports and a reinforced four-leg base that stays steady even on casters.

Read more

The horizontal ports hold a racking arm, carb stone and thermometer the way pro tanks do, which allows smaller minimum batches and better carbonation. A 2" port takes an immersion heater for ale and kveik temperatures in a cold room.

Three-legged conicals tend to tip, especially on casters. The X3's four crossbar-reinforced legs flare out for stability and stand tall enough to fit the Flex Chamber or an elbow underneath. Thread-in adjustable feet level it on uneven floors and swap for casters any time.

X3 Jacketed Uni Conical

Explore the fully loaded X3

Tap a number to see what each part does and which upgrades you can add.

Explore the fully loaded X3
01Add-on

Kit for Fermenting Under Pressure

Spunding valve and gauge let you ferment under pressure to cut esters and carbonate in the tank. The built-in 15 psi PRV is a safety valve only.

Details

Specs and details

Sizes and dimensions
SizeTypical batchFill rangeFermenter heightFermenter widthPrice
7 gal5 gal0.4 to 6.6 gal38"21.3"$1,249.99
14 gal10 gal0.8 to 13 gal42.5"23.3"$1,399.99
25 gal20 gal1.5 to 23 gal46.5"30.5"$1,699.99
38 gal31 gal (1 bbl)2 to 33.9 gal55"30.5"$1,999.99

Minimum fill is set by the lowest cone port. Maximum fill leaves 20% or more headspace for fermentation. Flex Chamber volume is not included.

What's in the box
  • X3 fermenter with welded external cooling jacket, 304 stainless, mirror polished inside and out
  • Pressure Pack lid with Clear Float floating dip tube
  • Flex Chamber Collection Jar
  • 3" tri-clamp butterfly dump valve
  • 8" three-piece tri-clamp with one-piece molded gasket
  • Neoprene insulation sleeve
  • 1.5" thermowell for a temperature probe
  • Blowoff U barb and silicone blowoff tube
  • Four adjustable leveling feet
  • Built-in 15 psi pressure relief valve

Not included: a glycol chiller and tubing, which the jacket needs for cooling.

Ports and connections
  • 8" tri-clamp top opening, wide enough to clean by hand
  • Five 1.5" tri-clamp lid openings, including one for a Hop Bong
  • Three horizontal welded cone ports for a racking arm, carb stone or thermometer
  • 2" tri-clamp cone port for an immersion heater
  • 3" tri-clamp bottom dump
  • 1.5" tri-clamp cooling jacket inlet and outlet
Pressure fermentation and accessories

Pressure fermentation needs the Kit for Fermenting Under Pressure. The built-in relief valve can clog with krausen, so it is not enough on its own to ferment or cap an active fermentation. The kit adds a spunding valve, a sealed gauge and a dedicated relief valve.

Or add them all at once with the Pro Series loadout

Manuals and setup notes

X3 instruction manual (PDF)  ·  Volume and dimensions chart (PDF)

The Clear Float dip tube fits every X3 size. On smaller fermenters you may need to shorten its silicone tube: installed in the empty tank, the end of the dip tube should just touch the bottom.

Documents:X3-Instructions(Version X3.1)WEB ·X3 Volume-Dims-Chart

Common questions
Which size do I need?

7 gal for 5 gallon batches, 14 gal for 10, 25 gal for 20 and 38 gal for a full barrel (31 gal).

Do I need a glycol chiller?

For temperature control and cold crashing, yes. The jacket circulates chilled glycol. The chilling packages add an IceMaster chiller and insulated tubing.

Can I brew a smaller batch than the typical size?

Yes. The cone ports sit low, so minimum fill is 0.4 gal on the 7 gal and 2 gal on the 38 gal. See the fill ranges above.

Can I add casters later?

Yes. The adjustable feet thread out and the caster kit threads in, and the reinforced four-leg base stays stable on casters.

How does it ship?

By freight, free in the contiguous US.

Full description

No Need to Upgrade Later, The X3 Comes Fully Loaded:

  • Built-in external cooling jacket with 1.5" TC Ports
  • Neoprene jacket for insulation
  • Pressure Pack lid with floating dip tube, draft style QD connections for sampling/serving, and an extra 1.5" TC for hop bongs.
  • The Clear Flex Chamber Bottom Dump allows you to see fermentation, collect and remove trub, and has added ports for purging, oxygenating, carbing and more... so flexible.
  • Highest quality mirror polish finish inside and out
  • Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation

New Features:

  • Professional 8” Tri-Clamp lid replaces the need for a complicated band clamp to attach the lid
  • Four crossbar reinforced legs, that flare out, create the most stable base and more access to the front fittings and dump system
  • Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more
  • 3" oversized bottom port and Butterfly Valve with 3” tri-clamp Flex Chamber collection vessel

The new X3 from BrewBuilt sets the new standard for quality. We guarantee that you will love the fit and finish of the X3 Uni Jacketed Conical. Made entirely of 304 stainless steel, with flawless welds and a dazzling mirror-polish finish inside and out that is simply the best. The BrewBuilt X3 Uni is easy to sanitize and even easier on the eyes. It is definitely Instagram worthy! #BrewBuilt

External Cooling Jacket
When it comes to temperature control for a homebrew conical fermenter the holy grail has been an external cooling jacket. Internal cooling coils have long been the answer and while they are simpler to make and relatively inexpensive, they are harder to clean and have issues cold crashing in warm environments. The BrewBuilt X3 Jacketed Conical offers maximum cooling power without any compromise of sanitation.

8” Tri-Clamp Top Port
New to the X3, the 8” Tri-Clamp lid is rock solid and easy to use. The 8” opening allows plenty of space to still get in and clean the inside of the conical by hand if desired. A unique 8”, three-piece, tri-clamp is used to make sealing the top very easy and very secure.

Extra Large 3” T.C. Dump Valve
The largest in the industry. Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 3" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Collection Jar and Yeast Harvester.

Reinforced Four-Leg Foundation
There’s a common complaint about the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modeled the X3 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X3 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintops that they wanted stronger, sturdier legs right out of the box that doesn’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so you can easily glide the fermenter around your brewery.

The reinforced four-leg design not only increased the stability and strength of the conical but also allows the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.

Adjustable Feet
The X3 Jacketed Conical comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.

Flex Chamber Collection Jar - Trub Separator & Yeast Harvester
Working in collaboration with KegLand, we developed the pressurizable Flex Chamber Collection Jar. It attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also, a great option for storing yeast! Simply attach a 3" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation.

Pressure Pack with Clear Float Technology
Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.

Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.

Other Features You’ll Love:

  • Downward-facing Blowoff U Barb prevents blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off
  • Stainless steel lid clamp with single-piece molded silicone gasket
  • In our GEN 3 redesign, we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons

X3 Accessories:

  • BrewBuilt Kit for Fermenting Under Pressure (Required to ferment or seal/cap an X3 with an active fermentation)
    The Pressure Relief Valve (PRV) that comes with the conical is not sufficient for fermentation as it can become clogged with Krausen. To ferment or seal/cap an active fermentation requires the use and safety of the Pressure Fermentation Kit. This no-compromises kit includes the same hardware you will find on a commercial unitank, including a dedicated pro level spunding valve, a sealed pressure gauge, and a dedicated commercial PRV. Read more about these key hardware features in the kit copy. Also included is liquid Foam-Axe which helps reduce Krausen. Please read and follow all special instructions that come with the kit as well as your instruction manual.
  • Hop Bong Oxygen-Free Dry Hopping Device
    The Hop Bong is a versatile pressurizable tri-clamp accessory that is perfect for purging oxygen from your dry hops before dropping them into your fermenter. Load up the Hop Bong, flush it with CO2, purge out oxygen with the handy PRV on top, then simply open the Butterfly Valve to inject your beer with a 6 oz payload of dry hops.
  • High Roller Caster Set
    Go mobile with this heavy-duty caster set. Your fermenter moves around the brewery a lot, so why not give it some glide? Roll from sanitizing to kettle transfer to keg transfer to cleaning with minimal effort. Moving a stainless conical around can be taxing. Give your back a break and upgrade your conical with a set of rolling casters.
  • IceMaster Max 2
    Built to pair perfectly with the IceMaster Max 2 glycol chiller. Easily and efficiently control your fermentation temperature and cold crash for conditioning and clarifying. Pair with our BrewBuilt Insulated Tubing Kit that comes complete with premium quick disconnects with shutoff valves that provide a “dry break” when they’re disconnected.
  • Immersion Heater
    The X3's cone features a 2" tri-clamp port specifically for installing an Immersion Heater. The low watt density heating element gently warms your fermenting beer without scorching. A must-have for brewers living in colder climates or if you want the peace of mind that your temperature will never drop too low for your ale or kveik strains regardless of the time of year.

Full List of X3 Conical Features:

  • External Cooling Jacket with 1.5" Tri-Clamp connections
  • Pressure Pack with Clear Float, a floating dip tube that draws beer from the top down.
  • Flex Chamber Collection Jar, a clear, pressure capable bottom jar that allows you to see fermentation, remove trub, and connect additional accessories
  • Neoprene insulation sleeve
  • Wide base with 4 legs for stability
  • 304 stainless steel construction
  • Mirror polish finish
  • Interior welds are the best in the business - uniquely ground and polished
  • (1) 2“ TC port for direct immersion heaters
  • (3) Horizontal welded cone ports
  • (1) 8" Lid Cap Opening with 8” TC Clamp
  • (5) 1.5" TC Lid Openings
  • 3" TC bottom dump with 3" TC butterfly valve
  • 1.5" Thermowell for inserting thermal probe
  • (4) Adjustable feet
  • Silicone tube for blow off
  • Stainless 8” Three Piece Tri Clamp & one piece molded gasket
  • Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations)

For volume and dimensional specs, Download the PDF.

Installation Note: The Pressure Pack's Clear Float floating dip tube is sized to fit all models of the BrewBuilt Conical. Depending on the size of your fermenter, you may need to shorten the silicone tube for better performance. When installed on your empty fermenter, you ideally want the dip tube to hang freely with just enough length for the end of the dip tube to touch the bottom of the tank.

X3 Pro Series loadout

Make it a Pro Series

Add the accessories that turn an X3 into a full unitank setup. Untick anything you already have.

Selected accessories
 

Add your fermenter or package with the button at the top of the page. Each item is added to your cart separately. The fermenter ships free by freight.

Check out more of our equipment