Beyond Beer · Cold Brew

Commercial cold brew, without the heavy lifting

The BrewBuilt® CB1 steeps 10 or 20 gallons at a time, filters through two nested mesh bags, drains from a dished bottom and cleans out through a side door. No hoisting wet grounds, no paper filters, no cloudy kegs.

304 stainless60-day returns1-year warrantyQuestions? 1-800-600-0033

No-lift cleanout

A side manway door and chute let you rake 30-plus pounds of wet grounds into a bin instead of hoisting them out of the top.

Two-stage clarity

A Fine bag nested inside an X-Fine bag polishes the extract without paper filters, protecting draft lines, mouthfeel and shelf life.

Every drop out

The dished bottom and center 1.5" tri-clamp drain empty the vessel completely, with no tilting.

Packages anywhere

Gravity-drain into kegs, bottle fillers or a canning line straight from the sanitary butterfly valve.

CB1 cross-section: nested Fine and X-Fine bags rest on a slotted false bottom above a dished bottom drain, with a side manway and chute for cleanout Coffee bed in Fine bag X-Fine outer bag Slotted false bottom Side manway+ chute 1.5" TC butterfly valve Dished bottom drain

How it works

Two bags, a false bottom and a door

The Fine bag holds the coffee bed. The X-Fine bag around it catches the sediment that slips past. Both rest flat on a heavy slotted false bottom, which keeps the wet grounds off the dished bottom so the center drain never plugs and the extract runs fast and clear.

When the steep is done, gravity does the transfer through the 1.5" tri-clamp butterfly valve, and the spent grounds come out sideways through the manway door and chute.

Cafes & coffee shopsSteep a week of cold brew in one go and keep it on tap.
RoastersTurn your own beans into wholesale concentrate or RTD.
BreweriesCoffee for stouts and a non-alcoholic option for the menu.
RTD & canningClean, filtered extract ready for kegs, bottles or cans.

Batch planner

How much coffee, how long, and what it costs

Tell us your recipe and how much you sell. We'll size the batch, map out the timing and price every drink. Change any number; it all updates.

1. Your recipe
2. Your volume
3. Your costs
Fine-tune the assumptions

Defaults follow the CB1 manual's yield table. Your grind, roast and setup will shift them a little.

Coffee per batch
Concentrate out
Drinks per batch
Batch size vs. the manual's max fill

Timeline per batch

Cost per batch

Estimates for planning only. Costs cover coffee, filter bags and brewing labor; cups, ice, milk, packaging and overhead are not included.

Brewing guide

How to brew with the CB1

From dry beans to a filled keg in eight steps.

1

Clean and set up

Wash the kettle, false bottom, valve and bags with PBW (never bleach, which pits stainless). Set the slotted false bottom on its shelf ring, close the side door evenly and close the butterfly valve.

2

Nest the bags

Lay the 25-micron X-Fine bag in first, flat on the false bottom. Slide the 75-micron Fine bag inside it and stretch both rims over the kettle lip.

3

Weigh and grind

Weigh coffee for your ratio (the planner above does the math). With both bags, grind medium-coarse, like coarse sand. Running the Fine bag alone? Go extra-coarse, like sea salt.

4

Foundation water

Pour about 25% of your water into the bags first. That cushion keeps the grounds from packing into the bottom of the mesh.

5

Add coffee and stir

Feed the grounds into the inner bag while adding the rest of the water. Stir with a long paddle until there are no dry pockets, then fold the bag tops in and set the lid.

6

Steep

12–16 hours at room temperature (65–72°F) or 20–24 hours in a walk-in (38–42°F). Go longer for more body, shorter if it turns bitter or woody.

7

Drain and package

Crack the lid so air can replace the liquid. Purge a keg with CO2, run a line from the valve to the keg's liquid-out post, vent the keg, and open the valve slowly for a quiet bottom-up fill. If the first runnings are cloudy, pour them back over the bed.

8

Clean out

Open the side door and rake the spent grounds down the chute into a bin, with no lifting. Rinse the bags right away, dry them fully and rotate a spare set.

StyleBagsCoffee : waterGrindServe
Clean concentrateFine inside X-Fine1:5Medium-coarseCut about 1:1 with water or milk
Ready to drinkFine inside X-Fine1:8Medium-coarseKeg, can or pour over ice
Full-body concentrateFine only1:5Extra-coarseBuilt for milk and syrups

By weight. Steep 12–16 h at room temperature or 20–24 h in a walk-in. The two-bag setup gives the clearest, brightest cup for kegs and cans; the Fine bag alone keeps more oils and body.

Keep it running

Replacement filter bags

Each CB1 ships with two Fine and two X-Fine bags. Keep a spare set on the shelf so a worn or drying bag never holds up production.

BrewBuilt® Cold Coffee Bag for CB1 Commercial Cold Brew System | 10 Gallon | Fine

10 gallon bag set

BrewBuilt® Cold Coffee Bag for CB1 Commercial Cold Brew System | 20 Gallon | Fine

20 gallon bag set

Pick a size

10 gallon or 20 gallon?

CB1 10 galCB1 20 gal
Price
Full batch, 1:5 concentrate
Full batch, 1:8 ready to drink
10 oz drinks per concentrate batch (cut 1:1)
Best forCafes and test batches, a few batches a weekBusy shops, roasters, wholesale and canning
Both include304 stainless dished-bottom kettle, side manway and chute, slotted false bottom, 1.5" TC butterfly valve, 2 Fine + 2 X-Fine bags, side TC port for a probe or sample valve, lid and hardware

Yields are estimates from the planner above.

Questions

What comes with the CB1?

The bottom-drain stainless kettle, the side manway door with removable chute, a heavy-gauge slotted false bottom, a 1.5" tri-clamp sanitary butterfly valve, leveling feet, two Fine (75 micron) and two X-Fine (25 micron) filter bags, and the tri-clamp gaskets, clamps and end caps.

How much coffee does each size take?

For a 1:5 concentrate, about 13.3 lb of coffee and 8 gallons of water in the 10 gallon for roughly 6 gallons of concentrate, and 26.7 lb with 16 gallons in the 20 gallon for roughly 12. Ready to drink at 1:8: 9.4 lb with 9 gallons (about 7.6 gallons out) or 18.8 lb with 18 gallons (about 15.2). The planner works out any ratio.

Do I need paper filters?

No. The 75-micron Fine bag holds the coffee bed and the 25-micron X-Fine bag around it catches the micro-sediment, with both resting on the slotted false bottom so grounds don't plug the drain.

How long does it take?

About 30 minutes to load, 12–16 hours to steep at room temperature (20–24 in a walk-in), then roughly half an hour to drain and another half hour to clean out. Most shops load in the afternoon and package the next morning.

The drain is slow. What's wrong?

Usually one of two things: the lid is sealed, so air can't get in to replace the liquid (crack it open), or the grind is too fine and has blinded the mesh. Close the valve, gently shift the inner bag to loosen the bed, and try again. Grind coarser next time.

How long do the bags last?

They're reusable nylon mesh. Rinse them right after each batch, let them dry completely, and replace them when they're torn, worn or won't rinse clean. A spare set lets one set dry while the other works.

Can I package straight from the CB1?

Yes. Gravity-drain from the 1.5" butterfly valve into CO2-purged kegs through the liquid-out post for a low-oxygen fill, or hook up to a counter-pressure bottle filler, a BeerGun or a small canning line.

Will it pass my health inspection?

Rules vary by city and county, so check with your inspector. The CB1 is 304 stainless with tri-clamp sanitary fittings; call us if your inspector wants the spec details.

What if it isn't right for my shop?

BrewBuilt gear comes with a 60-day no-hassle return and a 1-year warranty. Questions before you buy? Call a brewer at 1-800-600-0033.

Still deciding?

Talk it through with a brewer: batch size, packaging, cooler space. Call 1-800-600-0033.

Talk to a brewer