For R&D, pharma, biotech and food science labs

Jacketed stainless conicals for bench and pilot work

Run temperature-controlled trials in 7 to 38 gallon sanitary tri-clamp vessels before you commit to a production system. Glycol jacket, sealed closed transfers, live pricing, and they ship free in the contiguous US.

7–38 galWorking range
15 psiClosed transfers
304 SSTri-clamp throughout
BrewBuilt® X3 Jacketed Uni Conical Fermenter

Why R&D teams use them

The same features that make a good fermenter make a good bench-scale process vessel: tight temperature control, a sealed headspace and fittings that match the plant.

Real temperature control

A welded external glycol jacket, so product only touches smooth stainless. Hold a setpoint, or crash cold to settle solids.

Sealed, closed transfers

Tank rated to 15 psi. The floating dip tube pulls samples and transfers from the top down without opening the vessel.

Sanitary tri-clamp fittings

304 stainless with tri-clamp ports throughout, an 8" top opening for hand cleaning and a 3" bottom port that won't clog.

Sizes that step up

CORE at 7 gal, X3 at 7, 14, 25 and 38 gal. Same layout at every size, so trials scale by volume, not by redesign.

Bench setups, ready to order

Two vessels on one chiller lets you run a control and a variable side by side, each held at its own temperature. Every item goes in the cart as its own line.

Bench pair: 2 × CORE

Two 7 gal jacketed vessels on one IceMaster Max 2, each with its own pump and controller. Small enough for a bench, and well inside what the Max 2 is rated to cool.

Total$2,739.95

Pilot pair: 2 × X3 14 gal

Two 14 gal X3s on one IceMaster Max 2. The Max 2 is rated to crash two jacketed tanks up to 15 gal at once to 38°F (75°F room, neoprene jackets).

Total$3,939.95

Where they fit, and where they don't

These are sanitary brewing vessels, not validated process equipment. Here's the honest line.

A good fit for

  • Process development and feasibility trials
  • Small-batch fermentation and culture work
  • Temperature-controlled holding, mixing and settling
  • Cold crashing and separating settled solids
  • Closed, low-pressure transfers and sampling
  • Pilot runs ahead of buying a production system

Not designed for

  • GMP or validated production
  • Sterile or aseptic processing, or steam-in-place
  • Autoclaving
  • Processes that require 316L stainless
  • Pressures above 15 psi

Specs that matter in the lab

X3 (7–38 gal)CORE (7 gal)
Material 304 stainless, mirror polish inside and out 304 stainless
Temperature control Welded external glycol jacket, 1.5" TC connections Welded external glycol jacket
Pressure Built-in 15 psi PRV Tank and jacket rated to 15 psi
Top 8" TC lid plus (5) 1.5" TC lid ports 8" TC opening; 4" TC Pressure Pack lid
Bottom 3" TC port with butterfly valve and clear collection jar 3" TC port with end cap
Side ports (3) horizontal 1.5" TC cone ports, 2" TC heater port 1.5" TC thermowell, sample valve, spare port
Sampling Floating dip tube, top-down draw under pressure Floating dip tube, top-down draw under pressure
Thermowell 1.5" included 1.5" TC included
Height Floor standing, adjustable feet About 23.9" (33.9" with leg extensions)

Volumes and dimensions for each X3 size are in the spec PDF on the X3 product page.

Useful add-ons for lab work

Questions from lab buyers

Are these GMP or validated equipment?

No. They're sanitary 304 stainless brewing vessels, and we don't sell them as validated or GMP process equipment. Teams use them for development work and trials before they spec a production system.

Can they be autoclaved or steam sterilized?

No. Clean them by hand through the 8" top opening or with a CIP spray ball, and sanitize with a chemical sanitizer. Never exceed 15 psi in the tank or jacket.

Can you provide material certs or surface finish data?

Ask before you order and tell us what your team needs. We'll tell you what documentation is available for the vessel you're considering.

Can we buy on a purchase order?

Pick "Purchase order" in the quote form below and we'll follow up on how to process it.

What do we need to control temperature?

A glycol chiller and one insulated tubing kit per tank. The IceMaster Max 2 runs two tanks with separate controllers; the Max 4 runs four. The chiller's reservoir shouldn't be set below 28°F.

How does shipping work?

Free shipping in the contiguous US, freight included, on the vessels and chillers on this page. Ask us for international shipping.

Request a quote

Tell us what you're testing and the volumes you need. A BrewBuilt team member will reply with a quote, lead times and answers to any documentation questions.