The X1 Uni+ comes fully kitted out with the most advanced accessories available for the BrewBuilt Conical Fermenter. You'll have complete command of your fermentation with the ability to regulate temperature, monitor activity, harvest yeast, pull the clearest samples, and improve many more aspects of your overall fermentation process. The X1 Uni+ pairs the base model unit with a slew of upgrades, including a custom fitted CoolStix™ and insulating neoprene jacket, Flex Chamber Trub Separator & Yeast Harvester, and the Pressure Pack with Clear Float Technology.
Controlling fermentation temperature is one of the keys to brewing great beer. The CoolStix is an easy-to-use, innovative solution to achieve perfect fermentation temps. Pairs perfectly with an IceMaster Glycol Chiller or a BrewBuilt Chiller Pump Kit placed in ice water. Circulate cooling solution through the CoolStix to lower the temperature of your fermenting beer whenever needed. Unlike other in-solution cooling coils, the CoolStix utilizes a straight vertical design for the simplest cleaning and sanitizing process before and after use. The custom-sewn neoprene jacket will help keep your temperatures stable so you're not constantly cycling your submersible pump.
The 7- and 14-gallon models use a single rod CoolStix while the 27- and 42-gallon models use the CoolStix Reactor Rod with four cooling rods. The larger CoolStix Reactor Rod is made using a 4” TC fitting, so you will need to remove the Pressure Pack top to insert the Reactor Rod. After fermentation and cold aging are complete, you can replace the Reactor Rod with the Pressure Pack to sample and transfer under pressure.
Flex Chamber - Trub Separator & Yeast Harvester
The pressurizable Flex Chamber attaches directly to the butterfly dump valve and can be used for removing trub, harvesting yeast, and many other tasks. Since it's made from crystal clear Triton, you'll be able to visually monitor fermentation activity just as you would with a sight glass. Ball lock adapters can be attached to the threaded ports on either side, allowing you to connect oxygenation or carbonation stones, or flush the Flex Chamber with CO2 and use it to inject hops or other ingredients into your conical. Also a great option for storing yeast! Simply attach a 2" T.C. end cap or PRV and store your harvested yeast in the fridge for your next fermentation.
Pressure Pack with Clear Float Technology
Adding pressure capability will allow you to ferment, carbonate, and even serve all in one vessel. The Pressure Pack features the unique Clear Float Technology racking tube that can be used for taking samples, transferring to keg, or serving finished beer. This innovative feature draws beer from the top down, which means you’re always pulling the clearest, most sediment-free beer possible. Using pressure to draw a sample from the floating dip tube will also eliminate the tiny bit of oxygen that would be injected into your beer every time the traditional sample valve is opened.
Pressure transferring from fermenter to keg is the best way to protect your beer from oxygen when it’s at its most vulnerable state. Kegging could be considered the final hurdle in the brewing process, where limiting oxygen exposure is critical. This could mean the difference between your beer tasting great for months or tasting great for a week. Don’t take any chances. Use the Pressure Pack to keg from the top down and leave sediment behind.
X1 Uni Conical Fermenters
The BrewBuilt X1 Uni was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realization scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. And where standard features fell short, we pushed the boundaries into new territory never before seen on a premium conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer, and look good doing it. This is the brewing sidekick that you’ll brag to your friends about.
We guarantee that you will love the fit and finish of the X1 Uni Conical. Made entirely of 304 stainless steel, the quality exceeds what has previously been done in brewing applications and approaches the level of pharmaceutical-grade finish. With flawless welds and a dazzling mirror-polish finish inside and out, the BrewBuilt X1 Uni is easy to sanitize and even easier on the eyes. You’ll probably wanna snap a pic. #BrewBuilt
Extra Large 2” T.C. Dump Valve
Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the included Flex Chamber Trub Separator and Yeast Harvester.
Reinforced Four-Leg Foundation
There’s a common complaint seen in the feedback for other conicals on the market—the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as it’s foundation, so BrewBuilt modeled the X1 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X1 conical exceedingly stable when compared to other models. When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation. Brewers shouted from the mountaintop that they wanted stronger, sturdier legs right out of the box that don’t require an additional bracing shelf. The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so can easily glide the fermenter around your brewery.
The reinforced four-leg design not only increased the stability and strength of the conical, it also allowed us to extend it upwards, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.
Handles Made for Handling
Although we don’t recommend lifting and moving a full conical, there may be times when you need to do so with the help of a friend. The beefy handles are built for it and won’t let you down. The handles feature molded silicone over stainless for a solid, comfortable grip, and are uniquely designed to stop half-way when they swing out so you won’t crush your fingers.
The X1 Uni comes standard with thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.
Other Features You’ll Love:
Recommended minimum batch size is based on the volume needed to submerge the thermowell, allowing you to use a temperature controller to maintain fermentation temps.
The above chart represents the maximum drop in temperature you can expect based on the ambient temperature. For example, with the 7-gallon model in a 60°F environment, the lowest temperature you can expect to acheive is 38°F or 22°F less than ambient. This data was gathered using glycol at -6°F. Full temperature drop my take 36 to 48 hours.